User`s guide

Rockhopper II series printers – User’s Guide
117
AP-75095, Rev. 2.1, 18/08/2005
Setup items
Parameters Description
All Returns all parameters to the factory setting.
Refer to ‘All Initialize menu’
MediaSet Returns parameters in the media setup menu to the
factory setting.
Refer to ‘Media setup Initialize menu’
PrintMode Returns parameters in the print mode menu to the
factory setting.
Refer to ‘Printing mode initialize menu’
Initialize (1/3)
Command Returns parameters in the command setup menu to
the factory setting.
Refer to ‘Command setup Initialize menu’
Layout Returns parameters in the layout setup menu to the
factory setting.
Refer to ‘Layout Setup Initialize menu’
Func. Returns parameters in the function setup menu to the
factory setting.
Refer to ‘Function setup Initialize menu’
Roll media Returns parameters in the roll media setup menu to
the factory setting.
Refer to ‘Roll media setup Initialize menu’
Initialize (2/3)
Interface Returns parameters in the Centronics setup menu to
the factory setting.
Refer to ‘Centronics Initialize menu’
Network Returns parameters in the network setup menu to the
factory setting.
Refer to ‘Network Initialize menu’
Utility Returns parameters in the utility setup menu to the
factory setting.
Refer to ‘Utility Initialize menu’
File management The file management setup menu values are reset to
factory default settings.
Refer to ‘File management Initialize menu’
Initialize (3/3)
WEB password To return the WEB password setting value to the
initial value at the time of shipment from the factory.
Refer to ‘WEB password initialize menu’
Initialize (1/3-3/3) - • [CANCEL] key: Shifts to the previous hierarchy
menu.
Refer to ‘Setup menu’
5.4.76. All Initialize menu
All setup values are set to the factory default settings.
* All *
F1 →
No OK
← F2
Current parameter →
- No - (1/1)
Setup items
Parameters Description
<NO> No initialization.
OK To perform initialization.
All Initialize
- After setting, to shift to the previous hierarchy menu.
Refer to ‘Initialize setup menu’