User`s guide

Rockhopper II series printers – User’s Guide
115
AP-75095, Rev. 2.1, 18/08/2005
Setup items
Parameters Description
Rename File name To select to-be-changed file name by operating the
following keys.
• [F1] key: Selects file name with back feed way.
• [F3] key: Selects file name with forward feed way.
• [ENTER] key: Confirms setup value. The following
messages are displayed on the operation panel.
• [CANCEL] key: Cancels setup value, shifts to the
previous hierarchy menu.
Refer to ‘File management setup menu’
* TEMPFILE000 *
F1 → ← TEMPFILE000 → ← F2
F3 → → [T] → ← F4
JKLMNOPQRS+UVWXYZ01234
Setup items
Parameters Description
Characters you want to change To select characters you want to change by operating
the following keys.
• [F1] key: To select characters you want to change
with back feed way.
• [F3] key: To select characters you want to change
with forward feed way.
Characters you can use are :
A-Z or 0-9
To select to-be-changed characters by operating
following keys.
• [F2] key: Selects to-be-changed characters with
back feed way.
• [F4] key: Selects to-be-changed characters with
forward feed way.
To-be-changed
file name
-
• [ENTER] key: Confirms setup value, shifts to the
previous hierarchy menu.
• [CANCEL] key: Cancels setup value, shifts to the
previous hierarchy menu.
Refer to ‘File management setup menu’
5.4.74. Format menu
To perform formatting of the hard disk.
Notes :
• Format menu is displayed if a hard disk has been installed.
• If formatting of the hard disk is performed, all data saved on the hard disk will be
deleted.
* Format *
F1 →
No Yes
← F2
Current parameter →
- No - (1/1)