User`s guide

Rockhopper II series printers – User’s Guide
114
AP-75095, Rev. 2.1, 18/08/2005
5.4.72. File delete menu
Set this when you delete printing data saved on the hard disk.
Notes :
• File delete menu is displayed if a hard disk has been installed.
• If you delete a file by the File delete menu, you cannot retrieve that file again.
If you want to use the deleted file again, send the printing data to the hard disk
again. Re-print menu is displayed if a hard disk has been installed.
* Delete *
F1 → ← TEMPFILE00
F3 → →
SELECT
→ ENTER
Setup items
Parameters Description
Delete File name To select to-be-deleted file name by operating the
following keys.
• [F1] key: To select file name with back feed way.
• [F3] key: To select file name with forward feed
way.
• [ENTER] key: Deletes selected file, shifts to the
previous hierarchy menu.
• [CANCEL] key: Cancels setup value, shifts to the
previous hierarchy menu.
Refer to ‘File management setup menu’
5.4.73. Re-name menu
To change file name of printing data saved in the hard disk.
Notes :
• Re-name menu is displayed if a hard disk has been installed.
• The file name of printing data sent from the computer is always set to
"TEMPFILE000".
To save transmitted image data, change the file name to a name of your choice in
the Rename folder before transmitting the next printing data.
* Rename *
F1 → ← TEMPFILE000
F3 → →
SELECT
→ ENTER