User`s guide

Rockhopper II series printers – User’s Guide
113
AP-75095, Rev. 2.1, 18/08/2005
5.4.71. Re-print menu
Set following items when you want to draw printing data saved in the hard disk.
• File name
• Printing media number
Notes :
• Re-print menu is displayed if a hard disk has been installed on the product.
• When Reprintting the printing data,
• Use media of the same size as the printing data.
The size of the printing data will be the same as the initial paper size, even if
paper of a different size has been set, the printing will start from the same
printing start position.
• Use a cassette with the same colour and type of ink that will be used during the
printing data write.
If an ink cassette with differing colours or type is used, it will not print correctly.
* Reprint *
F1 → ← TEMPFILE000
+
← F2
F3 → →
0num -
← F4
Select
→ ENTER
Setup items
Parameters Description
File name To select file name to be printed by operating the
following keys.
• [F1] key: to select file name with back feed way.
• [F3] key: to select file name with forward feed way.
Number: 0 to 99 To change printing media number by operating the
following keys.
• [F2] key: Increases the setup value.
• [F4] key: Decreases the setup value.
[ENTER] key:
• To confirm setup value.
• Product starts printing.
Ready to Print
Heaters Cleaning
Cut&Feed LeverUp
User1 xxxm
• After printing, shift to normal condition.
Re-print
-
[CANCEL]key: Cancels the setup value, shifts to the
previous
hierarchy menu.
Refer to ‘File management setup menu’