User`s guide

Rockhopper II series printers – User’s Guide
112
AP-75095, Rev. 2.1, 18/08/2005
5.4.70. Write mode menu
To set writing method of printing data to the hard disk and printing method.
Notes :
• Write mode menu has been displayed if a hard disk has been installed on the
product.
• When writing printing data to the hard disk, be sure to set media in the tray.
The printing data is sized to fit the media.
If there is no media in the tray, the printing data cannot be written.
* WriteMode *
F1 →
OFF Write.Prn
← F2
F3 →
Write>Prn WriteOnly
← F4
Current parameter →
- OFF - (1/1)
Setup items
Parameters Description
<Off> No writing to the hard disk. Performs printing
immediately.
Writing/Printing Prints while writing the data to the hard disk.
Printing after writing Prints after writing the data to the hard disk.
Writes the data to the hard disk without printing.
Note:
Printing method can be set for
printing data saved in the hard
disk by Re-print menu.
Refer to ‘Re-print menu’
Writing only
Writing
- To shift to the previous hierarchy menu.
Refer to ‘File management setup menu’