User`s guide

Rockhopper II series printers – User’s Guide
109
AP-75095, Rev. 2.1, 18/08/2005
5.4.66. Power on cleaning menu
When cleaning should be performed automatically with the power is turned on.
* OnCleaning *
F1 →
OFF ON
← F2
Current parameter →
- OFF - (1/1)
Setup items
Parameters Description
<Off> Power on cleaning is not performed.
On Power on cleaning is performed.
Power on
cleaning
- To shift to the previous hierarchy menu.
Refer to ‘Utility menu’
5.4.67. Media width menu
If media detection has not been performed during initialization, the width of the media is set here.
It can be set in the following ranges:
• 50” model: 210mm-1273mm
• 64” model: 210mm-1651mm
• 87” model: 210mm-2240mm
Notes :
On the media width menu,
• If a value larger than the width of the media has been set, media or the product may
be contaminated by the ink during printing.
• If a value smaller than the width of the set media has been set, media may not be
cut correctly.
* Width *
210 mm – 1273 mm +
← F2
841 mm -
← F4
F2, F4
→ ENTER
Setup items
Parameters Description
• 50” model: 210mm -
<841mm> - 1273mm
• 64” model: 210mm -
<841mm> - 1651mm
media width
• 87” model: 210mm -
<841mm> - 2240mm
To change media width by operating the following
keys.
• [F2] key: Increases the setup value.
• [F4] key: Decreases the setup value.
• [ENTER] key: Confirms the setup value, shift to the
previous hierarchy menu.
• [CANCEL] key: Cancels the setup value, shift to the
previous hierarchy menu.
Refer to ‘Utility menu’