User`s guide

Rockhopper II series printers – User’s Guide
108
AP-75095, Rev. 2.1, 18/08/2005
5.4.64. ErrorDisplay menu
To set display method to the operation panel when minor error occurred.
* ErrorDisp. *
F1 →
OFF ON
← F2
Current parameter →
- OFF - (1/1)
Setup items
Parameters Description
<Off> No ErrorDisplay.
On To perform ErrorDisplay.
ErrorDisplay
- To shift to the previous hierarchy menu.
Refer to ‘Utility menu’
5.4.65. Media detection menu
When media has been initialized, to perform detection of width and edge of the media.
* Detection *
F1 →
Normal Off
← F2
F3 →
TakeupRoll RollFeed
← F4
Current parameter →
- Normal - (1/1)
Setup items
Parameters Description
<Normal> To perform media detection automatically.
OFF No media detection.
Take-up mechanism Make this setting when using the optional take-up
system.
RollFeed Make this setting when using the optional roll-off/roll-
up system.
media detect
- •[CANCEL] key: to shift to the previous hierarchy
menu.
Refer to ‘Utility menu’
Notes :
• The default setting is ‘Rollfeed’ as a result of the standard unwinder / winder 100
with your unit.
• When setting "Take-up Mechanism" on the Media Detection menu, the following
limits are applied to the operation of the product.
• For initial media, only the media width is detected.
• Under normal conditions, media cannot be sent backward.
• The media cannot be moved forward or backward from the Origin Setting menu.
• The settings in the Media Cut menu are disabled, and the settings are changed to
"Off". (Refer to ‘Media cut menu’)