User`s guide

Rockhopper II series printers – User’s Guide
107
AP-75095, Rev. 2.1, 18/08/2005
5.4.62. Version menu
The following software versions of the network interface board can be checked.
• Main version: software version (Main version)
• Sub version: boot version
* Version *
Current parameter→
Main Ver. 1.00 a
Current parameter →
Sub Ver. 1.00a
Setup items
Parameters Description
• Main version
• Sub version
The software version of the network interface board
is displayed.
Version
- - To shift to the previous hierarchy menu.
Refer to ‘Network setting menu’
5.4.63. Utility menu
To perform various settings for application functions of products.
* Utility *
F1 →
ErrorDisp. Detection
← F2
F3 →
OnCleaning Width
← F4
(1/1)
* Utility *
F1 →
Prn+Wipe
← F2
(1/1)
Setup items
Parameters Description
ErrorDisplay To set display method to the operation panel when
minor error occurred.
Refer to ‘ErrorDisplay menu’
Media detection When media has been initialized, to perform
detection of width and edge of the media.
Refer to ‘Media detection menu’
Power on cleaning When cleaning should be performed automatically
with the power is turned on.
Refer to ‘Power on cleaning menu’
Utility (1/2)
Media width If media detection is not performed for initial media,
to set the width of the media in the tray.
Refer to ‘Media width menu’
Utility (2/2) Print and Wipe To wipe while printing, to take care of possible
condensation on the print head nozzle plate.
Utility (1/2 – 2/2) - • [CANCEL] key: To shift to the previous hierarchy
menu.
Refer to ‘Setup menu’