User`s guide

Rockhopper II series printers – User’s Guide
105
AP-75095, Rev. 2.1, 18/08/2005
5.4.57. IP address menu
To set the IP address of the product.
* IPAddress *
F1 → ←
000.000.000.000 +
← F2
F3 → →
-
← F4
(1/1)
Setup items
Parameters Description
IP address <000.000.000.000>-
223.255.255.254
Use the following keys to change the IP address.
• [F1] key: Moves one digit to the left on the setting
value to be changed.
• [F2] key: Increases the setting value.
• [F3] key: Moves to the right on the setting value.
• [F4] key: Reduces the setting value.
• [ENTER] key: Sets the setting value, and moves the
screen to the menu of the previous hierarchy.
• [CANCEL] key: Cancels the setting value, and
moves the screen to the menu of the previous
hierarchy.
Refer to ‘Network setting menu’
5.4.58. Subnet mask menu
Set the subnet mask of the product.
* SubnetMask *
F1 → ←
255.255.255.255 +
← F2
F3 → →
-
← F4
(1/1)
Setup items
Parameters Description
Subnet mask 000.000.000.000 -
<255.255.255.000> -
255.255.255.255
Use the following keys to change the Subnet Mask.
• [F1] key: Moves one digit to the left on the setting
value to be changed.
• [F2] key: Increases the setting value.
• [F3] key: Moves to the right on the setting value.
• [F4] key: Reduces the setting value.
• [ENTER] key: Sets the setting value, and moves the
screen to the menu of the previous hierarchy.
• [CANCEL] key: Cancels the setting value, and
moves the screen to the menu of the previous
hierarchy.
Refer to ‘Network setting menu’