User`s guide

Rockhopper II series printers – User’s Guide
104
AP-75095, Rev. 2.1, 18/08/2005
5.4.56. Network setting menu
To make the settings for the network interface.
Notes :
• The Network Settings menu is displayed if the network interface board has been
installed.
• Be sure to consult the network administrator before making the settings in the
Network Settings menu.
* Network *
F1 →
IPaddress SubnetMask
← F2
F3 →
Gateway DHCP
← F4
(1/2)
* Network *
F1 →
MACaddress Version
← F2
(2/2)
Setup items
Parameters Description
IP address To set the IP address of the product.
Refer to ‘IP address menu’
Subnet mask To set the subnet mask of the product.
Refer to ‘Subnet mask menu’
Gateway To set the IP address of the connected gateway.
Refer to ‘Gateway menu’
Network (1/2)
DHCP To make the settings for the DHCP function of the
network server.
Refer to ‘DHCP menu’
MAC address The MAC address of the network interface board can
be checked.
Refer to ‘MAC address menu’
Network (2/2)
Version The following software versions of the network
interface board can be checked.
Refer to ‘Version menu’
Network (1/2 -
2/2)
- •[CANCEL] key: To shift to the previous hierarchy
menu.
Refer to ‘Setup menu’