User`s guide

Rockhopper II series printers – User’s Guide
101
AP-75095, Rev. 2.1, 18/08/2005
5.4.49. Function setup menu
To perform various settings for processing of printing data.
* Function *
F1 → CMY→K
Scale
← F2
F3 →
Mirror
(1/1)
Setup items
Parameters Description
CMYÆK Makes settings for printing method to present black.
Refer to ‘CMYÆK menu’
Scale Sets the enlargement and reduction ratios for printing
data.
Refer to ‘Scale menu’
Mirror To draw reversed printing data.
Refer to ‘Mirror menu’
Function setup
- • [CANCEL] key: Shifts to the previous hierarchy
menu.
Refer to ‘Setup menu’
5.4.50. CMY Æ
ÆÆ
Æ K menu
To set how to draw black.
* CMY→K *
F1 →
No Yes
← F2
Current parameter →
- Yes - (1/1)
Setup items
Parameters Description
<No> • If MH-GL, GL2 are set on the Command Settings
menu, be sure to use CMY (mixed colours) ink.
• If RTL-PASS is set, use both CMY (mixed colours)
ink and K (black) ink.
Yes Always use K (black) ink.
CMYÆK
- To shift to the previous hierarchy menu.
Refer to ‘Function setup menu’