Specifications

Rockhopper 38 – Maintenance Manual
95
AP-74038, Rev. 1.1, 25/01/05
4. Carry out the Print Head (Colour) Tilt Adjustment
Please refer to “Adjusting the Tilt of the Print Head(Colour)”
5. Carry out a test print
Please refer to “Test Procedures, Test 2”.
6. Fit a new Waste Fluid Box
Pleas refer to “How to enter Head Rank”
CAUTION:
About 100 cc of waste fluid will be expelled into the Waste Fluid Box from head cleaning
and initial filling. Fit a new Waste Fluid Box.
Please refer to “Replacing Waste Fluid Box”.
The message “Change Tank?” will appear on the panel display. You should confirm by
answering “YES”
CAUTION:
Head board assembly connectors J201 (MAIN1) and J202 (MAIN2) should be plugged
in securely. The main board may be damaged if power is applied when they are not
properly connected.