Specifications

Rockhopper 38 – Maintenance Manual

AP-74038, Rev. 1.1, 25/01/05

4.7.7 Replacing the Tube Guide Assembly

Step 1 : Remove the Unit Panel Cover. Refer to “Removing Unit Panel Cover”

Step 2 : Remove the Front Cover. Refer to “Removing Front Cover”

Step 3 : Remove the Y Rail Cover. Refer to “Removing Y Rail Cover”

Step 4 : Remove the Flexible Guide Fixer H (2 fastening screws).

Step 5 : Remove the Flexible Guide Fixer C (2 fastening screws)

Step 6 : Remove the Tube Guide Assembly

(Since it is clipped to the Ink Tubes and Steel Flexible Guide, remove them)

Step 7 : To install removed components, reverse removal procedure.