Specifications

Rockhopper 38 – Maintenance Manual

AP-74038, Rev. 1.1, 25/01/05

4.7 REPLACEMENT OF INK SUPPLY SECTION COMPONENTS

4.7.1 Replacing the Cartridge Frame Assembly

Step 1 : Carry out Head Cleaning. Refer to “Head Cleaning Procedure 1”

Step 2 : Take out all Cartridges.

Step 3 : Remove the right paper guide. Refer to “Removing Right Paper Guide”

Step 4 : Disconnect junction board connectors J402 (Detector BK), J403 (Detector C), J404 (Detector M),

J405 (Detector Y) and J406 (Ink ID BK), J407 (Ink ID C), J408 (Ink ID M), J409 (Ink ID Y), J410

(head height switch).

Step 5 : Remove the Unit Panel Cover. Refer to “Removing Unit Panel Cover”

Step 6 : Remove the Front Cover. Refer to “Removing Front Cover”

Step 7 : Remove the Y Rail Cover. Refer to “Removing Y Rail Cover”

Step 8 : Remove the Flexible Guide Fixer C (2 fastening screws).

Step 9 : Remove the Y Rail Cover Support (2 fastening screws).