Specifications

Rockhopper 38 – Maintenance Manual

AP-74038, Rev. 1.1, 25/01/05

4.6.5 Replacing the Maintenance Station Assembly

Step 1 : Remove the Unit Panel Cover. Refer to “Removing Unit Panel Cover”

Step 2 : Remove the Front Cover. Refer to “Removing Front Cover”

Step 3 : Remove the Y Rail Cover. Refer to “Removing Y Rail Cover”

Step 4 : Remove the Front Paper Guide. Refer to “Removing Front Paper Guide”

Step 5 : Remove the Panel Mounting Plate. Refer to “Replacing Pump Motor Assembly 1-6”

Step 6 : Take out the Maintenance Station Assembly (3 fastening screws).

Caution :

 Be careful not to disconnect the Waste Fluid Tube which is connected to the bottom.

Step 7 : To install removed components, reverse the removal procedure.

Adjustments:

1. Carry out the Capping Position Adjustment.

Please refer to “How to Adjust the Capping Station”.

2. Initialize the wiper count

Please refer to “How To Initialize Parameters”.