Specifications

Rockhopper 38 – Maintenance Manual

AP-74038, Rev. 1.1, 25/01/05

Caution :

 When screwing the cap assembly to the maintenance frame, push it right back

before fastening.

4.6.3 Replacing the Wiper

Step 1 : Remove the Panel Mounting Plate. Refer to “Replacing Pump Motor Assembly 1-6”

Step 2 : Move the Wiper back and, with the wiper rack disconnected, pull the Wiper up and remove it.

Step 3 : To install the removed components, reverse the removal procedure.

Caution :

 When refitting the Wiper, be careful not to damage the Head contact surface by

touching it with your hand or with forceps.

Adjustments:

 Initialize the wiper count (Refer to “How to initialize parameters”