Specifications

Rockhopper 38 – Maintenance Manual

AP-74038, Rev. 1.1, 25/01/05

4.6 REPLACING THE MAINTENANCE AREA

4.6.1 Replacing the Pump Motor Assembly

Step 1 : Remove the Unit Panel Cover. Refer to “Removing Unit Panel Cover”

Step 2 : Remove the Front cover. Refer to “Removing Front Cover”

Step 3 : Remove the Front Paper Guide. Refer to “Removing Front Paper Guide”

Step 4 : Remove the Right cover. Refer to “Removing Right Cover”

Step 5 : Remove the Panel Cable Connector and Tube Fixer (1 fastening screw) and disconnect

connectors J301

Step 6 : Remove the Panel Mounting Plate (2 fastening screws).

Step 7 : Open the Control Box.

Step 8 : Disconnect connector J102 (pump) from the Main Board.

Step 9 : Remove the cable clamp fastened tot the front X reinforcement.

Step 10 : Slide the Head to the left (X Motor Side) and remove the Pump Motor Assembly (2 fastening

screws).

Step 11 : To install the removed components, reverse the removal procedure.