Specifications

Rockhopper 38 – Maintenance Manual

AP-74038, Rev. 1.1, 25/01/05

4.5.5 Replacing the Cursor Plate Spring

Step 1 : Remove the Unit Panel Cover. Refer to “Removing Unit Panel Cover”

Step 2 : Remove the Front Cover. Refer to “Removing Front Cover”

Step 3 : Remove the Y Rail Cover. Refer to “Removing Y Rail Cover”

Step 4 : Bring the head to the centre of the printer, press down the left and right ends of the cursor plate

spring and pull it out to the right.

Nr. Description

1 Cursor plate spring

Step 5 : To install removed components, reverse removal procedure.