Specifications

Rockhopper 38 – Maintenance Manual

AP-74038, Rev. 1.1, 25/01/05

4.5.4 Replacing the Steel Flexible Guide Assembly

Step 1 : Remove the Unit Panel Cover. Refer to “Removing Unit Panel Cover”

Step 2 : Remove the Front Cover. Refer to “Removing Front Cover”

Step 3 : Remove the Y Rail Cover. Refer to “Removing Y Rail Cover”

Step 4 : Remove the Flexible Guide Fixer C (2 fastening screws).

Step 5 : Remove the Tube guide Assembly (Remove the Steel Flexible Guide which is clipped to the ink

tubes).

Step 6 : Remove the Steel Flexible Guide Assy (2 fastening screws, including the flexible cable fitting H).

Step 7 : To install removed components, reverse the removal procedure.