Specifications

Rockhopper 38 – Maintenance Manual

AP-74038, Rev. 1.1, 25/01/05

Step 1 : Remove the Unit Panel Cover. Refer to “Removing Unit Panel Cover”

Step 2 : Remove the Front Cover. Refer to “Removing Front Cover”

Step 3 : Remove the Y Rail Cover. Refer to “Removing Y Rail Cover”

Step 4 : Loosen the 10 screws holding the T Fence Pressure and remove the T fence.

Caution:

 Mind the Head Board and take out the T Fence on the X Motor side.

Step 5 : To install removed components, reverse the removal procedure.

Adjustments:

1. Gently wipe the T Fence with a lint-free cloth which has been wet with water or

ethanol (Lint-free cloth is closely woven from extremely fine threads and has no

nap and produces no dust.)

Caution:

 When wiping the T Fence, be careful not to rub it vigorously.