Specifications

Rockhopper 38 – Maintenance Manual

AP-74038, Rev. 1.1, 25/01/05

4.5.2 Replacing the Steel Belt

Step 1 : Remove the Unit Panel Cover. Refer to “Removing Unit Panel Cover”

Step 2 : Remove the Front cover. Refer to “Removing Front Cover”

Step 3 : Remove the Y Rail Cover. Refer to “Removing Y Rail Cover”

Step 4 : Remove the Left and Right Covers. Refer to “Removing Left and Right Covers”

Step 5 : Remove the Head Cover (2 fastening screws).

Step 6 : Loosen the 2 Steel Belt Tensioning Screws.

Nr. Description

1 Tension adjustment screws

Step 7 : Remove the Steel Belt (2 fastening screws).

Nr. Description

1 Fastening screws

2 Steel belt

Step 8 : Take off the steel belt from the Y Motor or Y Drive Pulley side.

Step 9 : To install the removed components, reverse the removal procedure.

Caution:

 Work carefully to avoid cutting your fingers on the end of the steel belt.

4.5.3 Replacing the T fence