Specifications

Rockhopper 38 – Maintenance Manual

AP-74038, Rev. 1.1, 25/01/05

Step 15 : Remove the Y cable guide fastening screws (5 screws).

Step 16 : Remove the screw holding the Y rail reinforcement plate and take out the pressure assemblies.

Caution :

 You will need a special tool such as a ratchet for the fastening screw on the bottom

of the Y rail reinforcement plate (a 4 x 10 mm hexagonal double SEMS).

Step 17 : Remove the pressure assemblies (15) from the Y rail reinforcement plate (2 screws for each

assembly).

Step 18 : To install the removed components, reverse the removal procedure.