Specifications

Rockhopper 38 – Maintenance Manual

AP-74038, Rev. 1.1, 25/01/05

Adjustments :

 Adjust the bundle of Y Cable, N cable and ink tubes.

(Make sure the pressure arm is lowered then move the head left and right and

fasten flexible cable fitting C so that there is no twisting)

 Carry out Front Head and Cutter Head distance adjustment.

(This adjust the distance from the leading edge of the media to the printing position)

Please refer to “How to adjust Front-to-Head, Cutter-to-Head Distances”

 Carry out the Linear Sensor Position adjustment.

Please refer to “How to Adjust the Rear Sensor Position”