Specifications

Rockhopper 38 – Maintenance Manual

AP-74038, Rev. 1.1, 25/01/05

4.3.7 Replacing the Heater Panel Cable

Step 1 : Open the Control Box. Refer to “Opening and Closing Control Box”

Step 2 : Remove the Front Paper Guide. Refer to “Removing Front Paper Guide”

Step 3 : Remove the Unit Panel Cover. Refer to “Removing Unit Panel Cover”

Step 4 : Disconnect connector J301 from the Heater Panel Unit Board.

Step 5 : Disconnect connector J10 (PANEL) from the Heater Board and remove the cable.

Nr. Description

1 Flat Cable

2 Connecter J10

Step 6 : To install the removed components, reverse the removal procedure.