Specifications

Rockhopper 38 – Maintenance Manual

AP-74038, Rev. 1.1, 25/01/05

4.3.6 Replacing the Heater Board Assembly

Step 1 : Remove the Front Cover. Refer to “Removing Front Cover”.

Step 2 : Remove the Unit Panel Cover. Refer to “Removing the Unit Panel Cover”.

Step 3 : Remove the Heater Panel Cover. Refer to “Removing the Heater Panel Cover”

Step 4 : Disconnect the flat cable connected to the mainboard.

Step 5 : Remove the four screws of the Heater Panel Assembly.

Step 6 : Remove the Heater Panel Board after removing the two screws holding the flat cable.

Step 7 : To install removed components, please reverse removal procedure.