Specifications

Rockhopper 38 – Maintenance Manual

AP-74038, Rev. 1.1, 25/01/05

4.3.5 Replacing the Control Panel Cable

Step 1 : Open the Control Box. Refer to “Opening and Closing Control Box”

Step 2 : Remove the Front Paper Guide. Refer to “Removing Front Paper Guide”

Step 3 : Remove the Unit Panel Cover. Refer to “Removing Unit Panel Cover”

Step 4 : Disconnect connector J301 from the Panel Board.

Nr. Part Description

1 Connector J301

2 Panel Cable

3 Screw

4 Fastening screw

Step 5 : Remove the Tube Guide (1 fastening screw).

Step 6 : Disconnect connector J110 (PANEL) from the Main Board and remove the cable.

Nr. Part Description

1 Connector J110

Step 7 : To install the removed components, reverse the removal procedure.