Specifications

Rockhopper 38 – Maintenance Manual

AP-74038, Rev. 1.1, 25/01/05

4.3.1.2 Replacing the DC Cable Assembly

Step 1 : Open the Control Box. Refer to “Opening and Closing Control Box”

Step 2 : Remove the power supply cover. (2 screws).

Step 3 : Disconnect connector J001 from the Power Board.

Step 4 : Disconnect connector J101 (MAIN) from the Main Board and remove the cable.

Step 5 : To install the removed components, reverse the removal procedure.

No. Description

1 Main board assy

2 Power board assy

3 Connector J101

4 Connector J001