Specifications

Rockhopper 38 – Maintenance Manual

AP-74038, Rev. 1.1, 25/01/05

4.3 REPLACEMENT OF BOARD ASSEMBLIES

4.3.1 Replacing the Switch Cable Assembly / DC Cable Assembly

Caution :

 The power cable connector must be disconnected before this operation.

4.3.1.1 Replacing the Switch Cable Assembly

Step 1 : Open the Control Box. Refer to “Opening and Closing Control Box”

No. Description

1 Switch cable assembly

Step 2 : Disconnect connector J101 from the Main Board Assembly.

Step 3 : Remove the power supply cover (2 screws).

Step 4 : Press the Switch Lock and remove it by pushing it out.

Step 5 : To install the removed components, reverse the removal procedure.