Specifications

Rockhopper 38 – Maintenance Manual

AP-74038, Rev. 1.1, 25/01/05

4.2.4 Removing the Unit Panel Cover

4.2.5 Removing the Heater Panel Cover

4.2.6 Removing the Y Rail Cover

Step 1 : Remove the Unit Panel Cover.

Refer to “Removing Unit Panel Cover”

Step 2 : Remove the Front Cover.

Refer to “Removing Front Cover”

Step 3 : Remove the Cartridge Covers (2 screws).

Step 4 : Remove the Y Rail Cover Screws (5 screws)

Step 5 : Remove the Y Rail Cover by lifting it up.

Step 6 : Reinstall all parts in the opposite order of the

removal procedure.

Step 1 : Loosen the two screws on the Front

Cover Right Cover Shaft and push the

Front Cover to the left.

Step 2 : Loosen the Unit Panel Cover Screw by 3

mm or remove it.

Step 3 : Slide the Unit Panel Cover to the left (in

the direction of arrow A) and remove it

towards you (in the direction of arrow B).

Step 4 : Reinstall all parts in the opposite order of

the removal procedure.

Step 1 : Remove the Front Cover

Step 2 : Remove the Unit Panel Cover

Step 3 : Remove the four screws of the Heater

Panel Assembly.

Step 4 : Reinstall all parts in the opposite order of

the removal procedure.