Specifications

Rockhopper 38 – Maintenance Manual
35
AP-74038, Rev. 1.1, 25/01/05
4.2.1 Removing right cover
Step 1 : Remove the four screws.
Step 2 : The cover is tightened shown by arrow A.
Remove the cover while lifting in the
direction of arrow B.
Step 3 : Reinstall all parts in the opposite order of
the removal procedure.
4.2.2 Removing the left cover
Remove in the same way as for the right Cover.
4.2.3 Removing the Front Cover
Step 1 : Remove the Right cover.
Step 2 : Loosen the two fastening screws on
the right side of the Front Cover.
Step 3 : Loosen the Unit Panel Cover Screw
and remove the Panel Cover by
sliding it about 3 mm to the left.
Step 4 : Slide the right side Front Cover
Shaft to the right.
Step 5 : Remove the Front Cover by sliding it
to the right.
Step 6 : Reinstall all parts in the opposite
order of the removal procedure.
Before replacing the Right Cover,
open and close the Front Cover to
check that the Cover Switch is being
pressed correctly.