Specifications

Rockhopper 38 – Maintenance Manual
27
AP-74038, Rev. 1.1, 25/01/05
3. SPECIFICATIONS
3.1. INTRODUCTION
This section explains the specifications, optional parts and supplies, installation procedures for optional
parts, and user support for this printer.
3.2. PRODUCT SPECIFICATIONS
Specifications are liable to changes without prior notice. All trademarks mentioned are property of their
respective owners.
Printers
Technology Drop-on-demand Piezo electric – Microdot™ Technology
Maximum Media Widths 954 mm (37,55”)
Maximum Print Widths 934 mm (36,77”)
Media Thickness
Diameter / Core
Weight
Maximum: 0,8 mm
Maximum: 150 mm / 2” and 3”
Maximum: 11.5 kg
Colour Channels 2 colour channels
Inks Eco-Solvent Plus CMYK
Ink Cassette Capacity 220 ml
Print Modes & Panel Control Options Uni & Bi-directional output, Interweaving, Origin Control
High Speed 7,2 m²/h
Production 3,6 m²/h
Speed Overview
High Quality 0,68 m²/h
LCD Display Unit Backlight LED – 4 lines x 20 characters
Heater Backlight LED – 4 lines x 16 characters
Take-up System Automated (optional)
Roll Media Core 3” (2” optional)
Interface Centronics, IEEE 1284 compatible / Network, High Speed Interface
(standard high-speed interface card – 4 Mb/s) (optional)
Graphics Command Language RTL-PASS, MH-GL, MH-GL/2
Power Consumption 930 VA
External Dimensions in mm (W x D x H)
Weight
1520 x 580 x 1264
57 kg
Noise Level Operating: 54 dB or less
Standard VCCI (Class A), FCC (Class A), UL, CE, CCIB
Standard Items Software controllable pre heater and dryer, starter RIP software, media
collection basket.
Area 2.07 m² larger.
Voltage AC100V - 120V or AC220V – 240V
Frequency 50/60Hz±1Hz
Electrical
Capacity AC100V - 120V: 3A or more
AC220V - 240V: 1.5A or more
Recommended working
environment
Temperature: 22°C to 30°C
Humidity: 40% to 60%, without condensation
Operational conditions Temperature: 10°C to 35°C
Humidity: 20% to 60%, without condensation
Rate of change Temperature: No more than 2°C per hour
Humidity: No more than 5% per hour
Environmental
Storage environment Temperature: -10°C to 60°C
Humidity: 20％ to 85%, without condensation (When ink has been
discharged.)