Specifications

Rockhopper 38 – Maintenance Manual
24
AP-74038, Rev. 1.1, 25/01/05
2.2.2. Menu Structure – overview
Command
MH-GL2 / MHGL, GL2 /
RTL-PASS
Printer command language
selection
PlotArea Normal / Expend
Set-up hard clip area
depending of media size.
Position P1 / Full / LL
Set-up initial pen position in
MH-GL, GL2 and MH-GL2.
Terminat Special / Normal
Command Language
terminator selection.
Resolut 720dpi / 360dpi / 300dpi Select logical resolution.
OnlineTimer
Off / 10s / 20s / 30s /
40s / 50s / 60s / 90s / …
/ 780s / 800s
In case of intermittent data
flow, determines time-out to
finalize plot.
Overwrite Last / Mix
Set-up control of overlapping
areas.
Command
OriginReset No / Yes
Allows manual nesting when
combined with backward feed.
InkDryTime
0 sec to 5 sec to 30 sec
to 60 min.
Set-up ink drying time before
sheet-off occurs.
Halftone Quality / Speed / Thin
Select method of pseudo-tone
processing.
KCMY→KMY
Yes / No Reserved for future use.
CMY→Black
Yes / No
Allow mixed black (CMY) or
not.
KYCMYK No / Yes Reserved for future use.
Scale 25% to 100 % to 400% Expand or reduce print data.
Mirror Off / Y On Reverse printing set-up.
Direct. Command / MAX-MIN
Media size determined by
Page size Command or by
plot data.
Cut Position Data / Standard
Specify cutting position on roll
media following data or
standard media size.
MediaCut Auto / Off / Manual Automatic sheet-off set-up.
Copy 1 to 99 Set-up number of copies.
InkDensity Normal / Micro
Select Normal or Micro dot
drop size in function of media
& ink type.
Dist.Adj
No / Clear / Change /
Confirm
Plot distance adjustment.
Function
StepAdj Change / Clear
Micro-banding elimination via
microstep adjustment.
Mode Bi Centro / Centro
Select between uni-directional
and ECP high speed.
Centro
Timing A – B / B – A
Select ACK timing for BUSY
state.
Network IP Address
000.000.000.000 to
192.034.041.015 to
255.255.255.255
ErrorDisplay Off / On Show or hide simple error.
No Initialize printer set-up.
Yes InitialAll No / OK Initialize printer set-up.
InitialCommand No / OK Initialize printer set-up.
InitialFunct No / OK Initialize printer set-up.
InitialCentro No / OK Initialize printer set-up.
Initialize
InitialNetwork No / OK Initialize printer set-up.
Dump
Start – End / All (Cancel
with CANCEL-key)
Set-up data dump mode.
Wash
Starts manual head wash
before ink type switching.
Normal Starts a NORMAL cleaning
Clean
Powerful Starts a POWERFUL cleaning
No
Fill
Yes Starts a Ink Fill Sequence
Ink Change No / Yes Starts ink Change Procedure
Online
Utility
Maintenance
Rec.
Prints maintenance record.