Specifications

Rockhopper 38 – Maintenance Manual
229
AP-74038, Rev. 1.1, 25/01/05
No Message N° Checkpoint Action
1.1 • Are environmental
conditions within the range
recommended for assured
operation as checked in the
primary consultation?
→After checking compliance
with the range
recommended for assured
operation, please explain
these points in detail.
1.2 • Is the steel belt tension
adjusted properly?
150 g ± 20 g
→Re-adjust steel belt
tension
1.3 • Is the timing fence dirty or
has foreign matter stuck to
it?
→Clean it.
1.4 • Is the timing fence scared
or damaged?
→Replace it.
1.5 • Is the Y drive pulley set
screw loose?
→Re-tighten the set screw
securely.
1 • Inaccurate line length in the
direction of head movement
(Main scanning direction)
1.6 • The internal processing
operation of the main board
may be faulty.
→Initialize, re-enter or re-
adjust the parameters and
try again.