Specifications

Rockhopper 38 – Maintenance Manual
225
AP-74038, Rev. 1.1, 25/01/05
No Message N° Checkpoint Action
1.1 • Does cleaning restore
normal operation?
→Carry out three successive
cleanings.
1.2 • Is media
recommended by
Mutoh being used?
→If the media is causing the
symptoms, and it is not
recommended media, the results
cannot be guaranteed. Please
use recommended media.
1.3 • Is there a combination
of printing settings?
→With compound printing such
as Panel/User setup/Overprint,
etc., last print priority. (For
details, refer to “Parameter
Settings” in the Operation
Manual.)
1.4 • Does the head that is
fitted have a rank that is
different from the
recorded rank?
→Re-enter the rank of the black
head correctly.
→Re-enter the rank of the color
head correctly.
1.5 • Check that the T-
fence and Encoder
behind the head board
assy are not touching.
→If they are touching, adjust
them.
→If adjustment is not effective,
replace both the head board
assy and the T-fence.
1 • Edges of printing are blurred
1.6 • The main board assy
may be damaged.
→Replace it.