Specifications

Rockhopper 38 – Maintenance Manual
221
AP-74038, Rev. 1.1, 25/01/05
No Message N° Checkpoint Action
1.1 • Check the connections for head
cables 1 and 2. Are they inserted
obliquely? Are they locked
securely? Check.
J207 (HEAD BK) and J208
(HEAD COL) on the head board
assy.
→ Reconnect the connectors.
→ Replace head cables 1 and 2.
1.2 • Check the Y cable connections →Are they inserted obliquely?
Check. J201 (MAIN1) and J202
(MAIN2) on the head board assy.
J111 (HEAD1) and J112 (HEAD2)
on the main board assy.
→Insert the connectors again.
→Replace both Y cables 1 and 2.
1.3 • The head board may be
damaged.
→Replace it.
1.4 • The head may be damaged. →Replace the black print head.
→Replace the color print head.
• The main board may be
damaged.
→Replace it.
1 • The entire surface is
printed black
Bad example
Good example
1.5
CAUTION:
Main board connectors J111 (HEAD1) and J112 (HEAD2) and head
board connectors J201 (MAIN1) and J202 (MAIN2) should be
plugged in securely.
The main board may be damaged if power is applied when they are
not properly connected.