Specifications

Rockhopper 38 – Maintenance Manual
211
AP-74038, Rev. 1.1, 25/01/05
No Message Explanation N° Checkpoint Action
1.10 • Are there any breaks, cuts or air
leaks in the ink tubes?
→ Change each ink tube,
cleaning each time and
checking that ink flows during
cleaning.
1.11 • Are connectors J207 (HEAD K)
and J208 (HEAD COL) on the
head board assy, and head cables
1 and 2 on the print head, inserted
obliquely? Are they locked
securely? Check.
→ Check connector
connections.
→ Insert the connectors
again.
1.12 • Is there a broken lead in head
cables 1 and 2?
→ Replace head cables 1
and 2.
1.13 • Is the print head assy damaged?
→ Replace the print head
assy (black).
→ Replace the print head
assy (color).
1.14 • Is the head board assy
damaged?
→ Replace it.
1.15 • Check the Y cable connections
→ Is it inserted obliquely?
Check. J201 (MAIN1) and
J202 (MAIN2) on the head
board assy.J111 (HEAD1)
and J112 (Head2) on the
main board assy.
→ Insert the connectors
again.
1.16 • Is there a broken lead in Y cables
1 and 2?
→ Replace Y cables 1 and 2.
1.17 • The main board assy may be
damaged.
→ Replace it.
1 Initial
filling is
completed
but no ink
comes out
Initial filling
means to
fill the head
with ink to
enable it to
print.
Caution :
Main board connectors J111 (HEAD1) and J112
(HEAD2) and head board connectors J201 (MAIN1)
and J202 (MAIN2) should be plugged in securely. The
main board may be damaged if power is applied when
they are not properly connected.