Specifications

Rockhopper 38 – Maintenance Manual
192
AP-74038, Rev. 1.1, 25/01/05
No Message Explanation N° Checkpoint Action
1.1 • Check RAM capacity with the
printer’s self-diagnostic
“Examination: RAM capacity”.
→ The capacity without
optional extended memory
is 8MB. If SIMM has been
extended, the value
“Standard memory 8MB +
extended memory” will be
displayed. If two 36MB
SIMMs haven been
installed, “80Mb” is
displayed.
“Optional Memory = ** MB”
shown in the Setup List is
the amount of extended
memory only.
→ If there is a difference
between the actual
memory capacity and the
memory capacity shown on
the panel or the memory
capacity shown in the
setup list, the SIMM may
be damaged. Replace the
SIMM.
1 Not enough
memory
SIMM**MB
(Intermediate
code buffer
overflow)
When this printer
has insufficient
memory for the
amount of data
sent by the
personal computer,
this message
indicates the
required memory
size.
1.2 • The main board may be
damaged
→ Replace it