Specifications

Rockhopper 38 – Maintenance Manual
165
AP-74038, Rev. 1.1, 25/01/05
7.2.7.2 How to control precision and specifications value
Step 1 : In fitting the Y Rail, the height is fixed by pressing on frame guide pins (left and right in each of
two places) and parallelism is fixed by the inserting the Y Rail fitting control jig (JD-42051)
between the Y Rail and the Frame. At this time, it doesn’t matter whether you use the capping
side as the reference and the opposite side becomes the contact point (where there are guide
pins).