Specifications

Rockhopper 38 – Maintenance Manual
143
AP-74038, Rev. 1.1, 25/01/05
5.8 AGING
This procedure concerns the aging of the mechanism and head. Details of the items are as follows.
Item Details
Carriage Motor Reciprocal scanning
Media Feed Motor Media feed roller drive
Cutter Media Cutting
Maintenance Capping
Head In-fill printing
Selection of items from the panel or a terminal is shown below.
Press [BACK] to return to the Diagnostic Menu.
5.8.1 Carriage motor
This procedure is used for aging the carriage motor. Select uni-directional print scanning mode or
bidirectional print scanning mode and specify a number of times for repeatability scanning of the carriage. If
the specified number is -1, aging will continue until a key is entered.