Specifications

Rockhopper 38 – Maintenance Manual
136
AP-74038, Rev. 1.1, 25/01/05
5.4.14 Head Cleaning
This procedure is used at the end of the production process or before prior to head replacement.
Note:
 For color head cleaning, you will be asked to confirm that all color cartridges have been
removed and to install the cleaning jig. Also, if you suspect the cartridge sensor to be
faulty, you can carry out the following procedure by pressing the [ENTER] key.
After head cleaning has been completed, the display will move to “AJST: Home”.