Specifications

Rockhopper 38 – Maintenance Manual
133
AP-74038, Rev. 1.1, 25/01/05
5.4.11 How to Adjust Front-to-Head, Cutter-to-Head Distances
This procedure is used to adjust the distances between the front sensor and the head and between the
cutter and head which affect printing and media cutting by entering top and bottom margins.
Press [ENTER] to update settings.
Press [ENTER] at Bottom Distance to move to “AJST: TestPrint”
Enter the distance from the bottom of the media to the printing position.
Current bottom margin is 25.0 mm
Real length [mm] =
The distance from the bottom of the media to the printing position is 25.0 mm. (Return to Adjustment Menu)
Press the [Return] key to update the setting
Front/Cutter to Head Distance Adjustment Pattern
Adjustment Items Top and bottom margins.
Printing Method Black, single-pass, uni-directional 360 dpi