Specifications

Rockhopper 38 – Maintenance Manual
132
AP-74038, Rev. 1.1, 25/01/05
5.4.10 How to Adjust the Media Transport Distance
This procedure is used to adjust the position of black or color flushing into the flushing box. The adjustment
causes flushing into the flushing box and from the results the position for black or color flushing will be
entered in 720 dpi units. Enter a positive value to shift the flushing position towards the capping side, or a
negative value for the opposite direction.
Press [ENTER] to update the settings. If settings have been changed, another adjustment print will be made. If there
was no change, the display will move to the “AJST: Top&Bottom” menu.
Media feed distance adjustment pattern.
Adjustment items Adjust the distance for media transport
Printing method Colour, two-pass, uni-directional, 360 dpi
Standard values
Up to 500 mm + 0,1%
Here, the adjustment is 300 mm so the actual value, x,
will be 299.7 ≤ x ≤ 300,3 mm