Specifications

Rockhopper 38 – Maintenance Manual
131
AP-74038, Rev. 1.1, 25/01/05
5.4.9 How to Adjust the Flush Pointer
This procedure is used to adjust the position of black or color flushing into the flushing box. The adjustment
causes flushing into the flushing box and from the results the position for black or color flushing will be
entered in 720 dpi units. Enter a positive value to shift the flushing position towards the capping side, or a
negative value for the opposite direction.
Press [ENTER] to update settings.
If a change has been made, flushing will be repeated. If [ENTER] was pressed with no change has been
made, the display will move to the “ADJ: Xlength” menu.