Specifications

Rockhopper 38 – Maintenance Manual
115
AP-74038, Rev. 1.1, 25/01/05
5.3 EXAMINATION
This is intended for board checking. X and Y excitation is not turned on by selecting “Examination” from the
Diagnostics Menu.
The X and Y excitation condition will be preserved as it is at the time you select an item to be examined.
Items to be examined are as follows.
Item Details
Memory Capacity Check memory capacity
Version Programs, Backup parameters, DIP Switches
Panel Keys, LCD, LEDs, Buzzer
Sensors XF, XR, Covers, Levers, Origin, Ink out, No cartridge, Special cartridge, Media edge,
Thermistor, Waste fluid tank
Encoders X-axis (media feed), Y-axis (carriage)
Fans Check on/off
Network Initializing, None, Error, Initialization Error, Initialization OK
History Maintenance, Major failure
Head Waveform Check head drive waveform (No function)
5.3.1 Memory Capacity
This procedure s used to check the capacity of the memory on board. When this item is selected, the
memory capacity is displayed on the panel or terminal.
EXAM: Memory Capacity
Press [ENTER] to shift to “Exam: Version” or [BACK] to shift to “EXAM: Memory Capacity”
5.3.2 Version
This procedure is used to confirm the firmware version (program, backup parameters) and DIP switch
settings (On: 0, Off: 1, switch 1 is Lsb, 8 is Msb). These are shown separately on the panel or all together on
the terminal.
EXAM: Version
Notes :
 DIP Switch 1 On : 0 x 02
 DIP Switch 2 On : 0 x 01
Press [ENTER] to shift to “Exam: Panel” or [BACK] to shift to “EXAM: Version”
Memory Capacity: 8Mb