Specifications

Rockhopper 38 – Maintenance Manual
105
AP-74038, Rev. 1.1, 25/01/05
Caution:
 Before starting work, be sure to disconnect the power supply cable connector.
Step 1 : Pull the Head to the left
Step 2 : Lift the Cutter Cap and slide it towards you
Step 3 : Lift out the Cutter Blade
Step 4 : To install the removed components, reverse removal procedure.
Caution:
 When the cutter blade is to be removed, the head must first be moved to a position
over the cutter mat.
 The tip of the cutter blade will be chipped and no longer able to cut if it touches
paper guide F.