Specifications

Rockhopper 38 – Maintenance Manual
104
AP-74038, Rev. 1.1, 25/01/05
4.8.9 Removing the Scroller from the printer
4.2.58.1
Remove the scroller from the printer
Step 1 : Go to the back of the printer and push the Scroller Lock Lever while you lift the right end of the
Scroller and slide the Scroller to the right to remove it.
Caution:
 Loosen the scroller adjustment screws completely.
4.2.58.2
Mount the scroller in the printer
Step 1 : Fit the Scroller, with media loaded, to the Scroller Support. Hold the fixed flange end with your left
hand and insert the left side into the Scroller Support from the inside, then insert the right end
from the top.
Caution:
 Loosen the scroller adjustment screws completely.
4.8.10 Replacing the cutter blade