Specifications

Rockhopper 38 – Maintenance Manual
103
AP-74038, Rev. 1.1, 25/01/05
4.8.8 Replacing the Origin Sensor Assembly
Step 1 : Remove the Front Cover. Refer to “Removing Front Cover”
Step 2 : Remove the Unit Panel Cover. Refer to “Removing Unit Panel Cover”
Step 3 : Remove the Y Rail Cover. Refer to “Removing Y Rail Cover”
Step 4 : Disconnect connector J205 (HORIGIN) from the Head Board Assembly
Step 5 : Remove the Origin Sensor (2 fastening screws)
Step 6 : To install removed components, reverse removal procedure.