User`s guide

User’s Guide Tensioning winder 30
37 AP-75104 - Rev 2.3 – 12/10/2011
5.5 LOADING ROLL MEDIA
Step 1 : Power ON the printer.
Step 2 : Power ON the winding system (at the back).
Step 3 : Be sure that the winding switch is set “OFF”.
Step 4 : Raise the pressure rollers of the printer.
Step 5 : Load a roll of media at the back of the printer.
(1) For ValueJet 1604, ValueJet 1604 W, ValueJet 1608 H and ValueJet 1614 between the
scroller supports
1 2
(2) For Spitfire and Rockhopper 3 on the scroller bar
Step 6 : Unwind some media and guide it under the pressure rollers to the front of the printer.
Step 7 : Load an empty core at the front of the printer at the same height of the media. Be sure that the
core is at least as wide as the media.
Step 8 : Be sure that the swingbar is in vertical position.