User`s guide

User’s Guide Tensioning winder 30
36 AP-75104 - Rev 2.3 – 12/10/2011
5.3 ACTIVATE THE WINDING SYSTEM
Step 1 : Power ON the driving mechanism at the back.
Step 2 : Enable the winding system with the switch on top of the driving mechanism.
Status LED
ON
The winding system is switched ON
BLINKING
The winding system is operating
OFF
The winding system is switched OFF
5.4 LOCKING THE SYSTEM
There are two different positions for the scroller bar. In one position it is “set” an in the other position it is
“free”. Use the handle to switch between the two positions. The purpose for this choice is as follows
SET
• automatic mode
• the scroller bar will be driven by the motorized mechanism when necessary
• not possible to turn the scroller bar by hand
FREE
• manual mode
• the scroller bar will have no contact with the motorized mechanism
• possible to turn the scroller bar by hand