User`s guide

User’s Guide Tensioning winder 30
22 AP-75104 - Rev 2.3 – 12/10/2011
Step 4 : Mount the left bracket (1) to the left leg (2) of the stand using 4 “M4x10” screws (3).
Notes
Note that there are 8 holes in the left bracket. Be sure to position the bracket correctly.
For ValueJet 16XX series For Rockhopper 3 and Spitfire
Step 5 : Insert the tensioning bar (1) in the positioning pen in the left bracket (2).
Notes
• Make sure that the tensioning bar is positioned in between the two stops.